The Ghost Immobiliser
Immobilisers are an effective tool to fight vehicle theft. They stop the vehicle from starting if it isn't equipped with a key fob. They also work well to stop hotwiring or other traditional forms of vehicle theft. However, more modern methods such as key replication and relay theft are becoming more widespread.
The Ghost Immobiliser was designed to combat these trends and make your vehicle undetectable. It's silent and stealthy and does not use key fobs, radio signals or LED indicators.
Easy to install
The Ghost Immobiliser is a revolutionary device that connects to the CAN data network within your vehicle to prevent key theft and cloning. It is a TASSA approved product, and insurance companies endorse it. It operates silently and is virtually undetectable to thieves. It uses buttons on your steering wheel as well as the central console to create a unique pin-code sequence that you must enter before you can start your car. You can create up to 20 different sequences to provide greater security. It's easy to install and doesn't require additional hardware.
It is recommended that you use an authorised installer of CAN immobilisers that is skilled in your specific vehicle type to get the best results. Ideally, they will have a workshop in your area where you can go to get your installation done. You can also find an array of tools and materials that can aid you in the installation. They will provide basic hand tools, multimeters insulation tape and heat shrink tubing to protect connections. A user manual will provide instructions specific to the wiring in your vehicle.
Before starting the installation Before beginning the installation, disconnect the battery to prevent short circuits and airbag deployment. It is crucial to confirm the location of the CAN H and L wires, since the wrong identification could result in improper system integration. It is also a good idea to mark the wires with small pieces of tape or label them with labels. Finally, make use of a multimeter to confirm that the power source identified provides a consistent 12V supply.
Advanced thieves can employ different methods to bypass the Ghost Immobiliser, including blocking and making false signals. These methods are based on amplifying signals from the key fob to the electronic controller unit. With the latest anti-jamming technology and a constant monitoring system your vehicle, it can be protected from these sophisticated attacks.
Enhanced security
A ghost immobiliser offers an extra layer of security to guard your car from theft. It uses an PIN security system that can be entered by pressing buttons on the dashboard or steering wheel, making it harder for thieves to take your car. The device is also designed to be hidden in the vehicle, and is devoid of any other lights or signals that could warn thieves of its presence. It communicates with your vehicle's ECU via the data bus, meaning it isn't vulnerable to the same hacking or relay attacks that could disable traditional security systems.
This system is a great investment for those who own high-end cars, since they are at a greater risk of being stolen due to their value and their popularity. Its enhanced security features guard against key duplicates, ECU swapping, and other threats to your car's security. Ghost immobilisers can be paired with an app, allowing you can easily arm and disarm them. They may have a service/valet setting that allows you to temporarily deactivate the immobiliser during repairs or maintenance.
Ghost immobilisers have another excellent feature: it doesn't require any wire cutting. This is a nice feature, especially if have a newer car that does not have any built-in immobiliser technology. Certain systems also work with GPS tracking devices, providing an extra layer of security to your vehicle. A GPS tracker can help to reduce your insurance premiums. If you opt to purchase ghost immobilisers ensure that it is TASSA verified and that a professional installer installs it for you.
Compatible with all major brands and models
The Ghost Immobiliser was made to work with all major car models and makes, safeguarding your precious possessions from theft. It generates a unique pin code by pressing buttons on your steering wheel, console or door panels. You must enter this code before you are able to drive. The system is tamper-proof and undetectable, and is backed by a three-year warranty. It is also fully endorsed by insurance providers. This means that you can reduce your premiums.
In contrast to standard immobilisers that make use of your key fob to control the ignition of your car and ignition, the Ghost system works by connecting directly with the engine controller unit through the CAN data bus. It is nearly impossible to disable, remove or hack. Additionally to this, Ghost is tamper-proof, meaning that it is virtually impossible to disable or remove. Ghost system can be connected with an secure iPhone application that permits remote monitoring and management.
You can choose an PIN code that is easy for you to remember but mathematically, it is impossible for thieves to figure out. You can customize and change the PIN at any time to ensure your vehicle's security even when it's located in a parking lot or on the street. You can also choose the valet or service mode when someone else requires your vehicle temporarily, such as when it's in the garage. This feature will also help prevent your car from being taken by a dishonest mechanic. To ensure your security, you can opt for a Ghost call alert which will inform you when your car is in motion or if it's moved.
Convenience
The ghost immobiliser guards your vehicle from common theft methods such as key relay or cloning. It works by connecting with the car's data network CAN and blocking communication with the engine ECU. This makes it hard for thieves to hack or clone your vehicle.
After installation, you'll need to enter a PIN up to 20 digits using the buttons on the dashboard as well as the steering wheel to start the car. The system is completely concealed and inaccessible to thieves because it does not emit any radio frequency signals. It is also able to be programmed to change the PIN of the user, which adds security. The system is also designed to prevent cutting of circuits and makes it virtually impossible to hack into.
Certain systems let you connect directly to the immobiliser via an app on your phone and disable it instantly when you forget your PIN. Some even have the option of a service/valet mode, which allows you to start your car temporarily, like when you have to drop it off for maintenance or valet parking.
The Ghost Immobiliser also is undetectable by thieves, as it transmits no radio signals. This is an important advantage over other security systems that are sold aftermarket. It is also easy to use and doesn't require complex wiring. It can be used in combination with dash cams to provide additional security. Dash cam Thinkware F70 features clear and crisp 1080p HD footage Format Free Technology, and parking mode. The system can also be hardwired to ensure optimal performance and longevity.
Installation
It is essential to select the most effective immobiliser ghost to safeguard your vehicle from thieves. This device can stop car thefts by preventing the communication between key fobs as well as the engine controller unit. This device prevents thieves from intercepting and cloning the signal used to start your vehicle. It also detects the presence of a tamper and alert the vehicle owner.
The device is easy to install and works with the existing systems in your vehicle. It requires no modification to the vehicle's wiring and can be concealed in a hidden place, like under the dashboard. Follow the steps in the manual to make sure that the device is properly installed. After installation, it is essential to test the system. This will ensure the ghost of the immobiliser works as it should.
You can purchase an Autowatch Ghost 2 immobiliser and then have it installed by a certified installer. The installer will connect the Ghost to the CAN Bus network in your vehicle, which makes it difficult for thieves to remove or bypass the system. The installation process typically takes between 2 and 3 hours.
go here is recommended that you look up the wiring diagram of your vehicle during the installation process. This will allow you to locate the CAN High and CAN Low wires that are required to connect the Ghost to the engine of your vehicle. It is also important to verify the connections to ensure that they are secure and insulated.
Once the installation has been completed, you can start using the Ghost Immobiliser in a normal manner. It will disable the ignition of your vehicle if it is not able to start it with the correct PIN, which you can enter yourself. The immobiliser ghost cost can also be put into Service/Valet mode for times when you need to hand over your vehicle for maintenance or valet parking.